ECUMaster GPS Receiver Connector:Deutsch DT and flows 50% more than

and flows 50% more than the ID1700x

Output PWM: 12bit 3

If you have an EMU Classic with the 5 pin expansion port

Can be used with any engine management system with knock sensing capabilities

This is done with data from analogue input channels or CAN bus data

ECUMaster GPS Receiver Connector:Deutsch DT and flows 50% more thanGPS to CAN is a device designed to provide position information over CAN BUS. The module uses a combination of different navigation systems (GPS, GLONASS, BeiDou, Galileo) as well as an internal IMU (Inertial Measurement Unit). Position, acceleration, and yaw information is transmitted at an update rate of 20Hz. Position data can be used to measure lap times, estimate current lap time, draw track maps and analyze vehicle logs with respect to track