1/24 Scale Arm Tool the SRM Tool does

the SRM Tool does

All 3 readings can be done in less than 10 seconds

VRP recommends removing the idler gear on a T-Jet and the rear axle on the inline cars

Differences Between the New and the old Balancer Includes the Enabler Tool

The kit comes with 12 disks 6 (#400) for cutting

1/24 Scale Arm Tool the SRM Tool doesThis ARM Tool is designed to read the resistance of all 1 24 & 1 32nd scale type Armatures one stack at a time. Turn on meter and place the armature to be tested in place, between the two measuring posts. Turn the slot in the commutator facing up. Rotate the metal stack and gently press down to make contact until the meter reading is steady. Record the reading & subtract the tolerance posted on the rear of the meter. All 3 readings can be done in less